Indoor air sampling
A pump draws a measured volume of air, often about 15 liters per minute for five to ten minutes, through a spore trap cassette. The lab counts and identifies spores per cubic meter.
Whether you're dealing with a landlord, a home sale, or a family member who feels worse indoors, call Breffni Remediation. We'll connect you with an independent mold tester in Winnetka who gets you lab results you can stand behind.
Testing is most useful when the mold is hidden, when someone needs documentation, or when you want proof a remediation job actually worked. A good tester will tell you when it isn't worth the money.
Answered day and night, holidays too.

Testing only helps if it's done right and interpreted honestly. Here's what you can expect.

Testers use calibrated air pumps with spore trap cassettes, sterile swabs, and tape-lift slides, and always pull an outdoor control sample for comparison.
You'll know the cost per sample and the lab fee before anything is collected, so you can choose how many locations to test.
Calls are answered 24/7 and routed to a tester near Winnetka. Standard lab results usually come back in two to three business days, with rush options available.
Insurance, licensing where required, and accredited lab partners are the baseline we look for in every independent tester.
Different questions call for different samples. Here's what testers in our network typically offer.
A pump draws a measured volume of air, often about 15 liters per minute for five to ten minutes, through a spore trap cassette. The lab counts and identifies spores per cubic meter.
Clear tape or a sterile swab picks up material from a suspicious stain so the lab can confirm whether it's mold and which genus it is.
A small port lets the tester sample air inside a wall without opening it, which is useful when you suspect growth behind finished drywall after a leak.
After removal, air samples inside the former work area should come back in line with outdoor levels, without elevated indicator types like Stachybotrys or Chaetomium. This is how you know the job is done.
When two sides disagree about mold, accredited lab results with proper paperwork are hard to argue with.

Straightforward, start to finish.
Describe the situation and what you need to prove. That shapes the sampling plan.
Samples are collected indoors and out, sealed, labeled, and logged on a chain-of-custody form.
Samples go to an accredited lab. You already know the cost from the upfront quote, and you'll know when to expect results.
The tester walks you through the results, compares indoor and outdoor counts, and gives a clear recommendation.

One free call gets a licensed and insured local tester on your calendar.
Call +1-844-326-4757 Now
Here's what some recent callers shared.

My landlord kept saying the spots in my bedroom were just dirt. The lab confirmed two types of mold on the wall, and the air sample was well above outdoor levels. That report got the repair done.
I wanted proof the remediation actually worked. The clearance air samples came back lower than the outdoor control, and I finally felt comfortable moving my kids back into the basement.
We were selling and the buyer asked about a past leak. One wall cavity sample and an air test showed nothing unusual, and the deal closed on time.
He walked me through every number on the report instead of just emailing a PDF. Knowing what was normal versus elevated made the whole thing less stressful.
Air tests tell you what you're breathing. Surface tests tell you what a visible stain actually is.
Without an outdoor baseline, indoor numbers have nothing to be compared against. It's what makes the results meaningful.
Standard lab turnaround is usually two to three business days. Many labs offer 24-hour or same-day rush analysis for an added fee.
Not very. Petri-dish kits grow mold in nearly every home, which tells you little. Professional sampling measures volume and compares indoor to outdoor air.
There are no federal limits for indoor mold spores. Results are judged by comparing indoor samples with outdoor controls and looking for water-damage indicator species.
It's a DNA-based dust test that identifies many mold species. Ask your tester whether it fits your situation, since it isn't always necessary.
We route testing calls from all over Winnetka to independent testers who work with accredited labs.
Common Winnetka service zip codes include 60093.
Just outside Winnetka? Check the list below or call to confirm.
Call +1-844-326-4757 to Confirm